Radial J48l Active Direct Box

$24.00

The J48 is a high performance 2-channel active direct box for live concert touring and professional recording studio applications

3 in stock

Add to wishlist

Categories: Audio, Live stream, Stage

Description

Welded I-beam construction makes it impossible to torque the PC board. This virtually eliminates cold solder joints – the No.1 cause of system failure in the field.
An innovative ‘slide-in-place’ XLR trace makes it possible to use I-Beam girder construction.
A digital switching power supply steps-up the internal rail voltage to 9-Volts. The J48 will not choke like other DI’s when hit with large transients.
A military-grade PC board is employed for maximum wear and tear in abusive environments. Welded steel standoffs ensure the PC board will not shift.
A -15dB pad allows super hot inputs such as that from a CD player to be connected and balanced for long runs.
Momentary 48V Check LED will flash once when the 80Hz filter is depressed to tell you phantom power is present.
The Merge function turns the input & thru into ‘left & right’ inputs to mono mix at the XLR output. This handy function saves valuable inputs on the mixer!
The input is connected to the instrument.
The thru-put is connected to the instrument amplifier. The J48 has a high input impedance to reduce loading.
Our book-end design creates a protective zone around the switches & connectors for best protection!
A heavy-duty baked enamel finish for excellent durability and great looks for years! 100% 14-gauge steel construction.
The 600 Ohm balanced XLR out is mic level to properly match concert splitters – will drive 1000 feet without appreciable noise.
A polarity reverse switch flips the polarity from the AES standard Pin-2 to Pin-3 on the XLR and is used when combining sounds that may be out of phase.
An 80Hz low-cut (highpass) filter gently reduces excessive bass for more headroom and clarity. Eliminates run-away resonant feedback from acoustics!
The ground-lift disconnects the ground path to the transformer at the XLR output. This is used when a ground path is made at the input side such as with a keyboard.
A no-slip full bottom pad reduces mechanical vibration, improves electrical isolation and keeps the J48 from moving around on busy stages!

Related products

Audio

RCF EVOX JMIX8

Rated 4.00 out of 5

$1,200.00

Hot

Audio

RCF SUB 702-AS II 12″ Powered Subwoofer

$90.00

Fulcrum Acoustics CS218L Dual 18″ Subcardioid Subwoofer

Audio

Fulcrum Acoustics CS218L Dual 18″ Subcardioid Subwoofer

$760.00

Blog

{"title":"All","number":"2","post_title":1,"ignore_sticky_posts":true,"meta":{"meta_date":true},"layout":"list","list_layout":"list_1","grid_layout":"grid_1","featured_layout":"featured_1","image_size":"hexwp_thumbnail","ratio":"hw-ratio100","image_width":"27","box_layout":"none","post_type":"post","action":"hexwp_post_list","post_status":"publish"}

Choosing the Right Acoustic Sound System for Your Event

11/30/2024

Spark Fountain Machines: Elevate Your Events with Spectacular Spark Displays!

11/26/2024

Related products

XLR Cable 15ft (3pin)

RCF EVOX JMIX8

XLR Cable 10ft (3pin) White

XLR Cable 20ft (3pin) White

RCF SUB 702-AS II 12″ Powered Subwoofer

Fulcrum Acoustics CS218L Dual 18″ Subcardioid Subwoofer

Choosing the Right Acoustic Sound System for Your Event

Spark Fountain Machines: Elevate Your Events with Spectacular Spark Displays!

Categories

My Account

Information